AT-3000 Plasma Control System

AT-3000 Plasma System

The AT-3000 Plasma Control System is designed with all considerations towards user-friendly and safe operation. Using PLC and Touchscreen control, the user can take advantage of many features that aid in the plasma process, such as: automatic start-up and shutdown sequences, an hour meter and settable maintenance alarm, and a series of built-in process alarms and warnings.

The system is designed with safety in mind, such that the AT-3000 can safely run Hydrogen as a secondary gas. The AT-3000 features a built-in user-operated Safety Purge System. This purge system allows a user to power up the console into a safe condition. All of the components of the system are designed so that all electrical signals and power entering and leaving the AT-3000 console during purging are deactivated. This insures that a dangerous condition prior to purging does not exist. From alarm and warning settings that include automatic safety shutdown sequences, to external components that send alarm feedback to the console, the AT-3000 system is designed with safety and ease of use in mind.

Standard features include:

  • Wall mounted console
  • Built-in user-operated Safety Purge System (Class 1 Division 2 Type Z Purging, per NFPA 496)
  • Booth and Emergency Stop Interconnections
  • Critical Orifice Gas Flow Control
    • Argon/Nitrogen Primary Gas Control
    • Helium/Hydrogen Secondary Gas Control
    • Two Argon/Nitrogen Carrier Gas Controls
  • Touchscreen/PLC Control of System Functions
    • Automatic Process Start and Stop
    • Alarms and Warnings with Automatic Safety Shutdown Sequences
    • Closed Loop Amperage Control
    • Dual Powder Feeder Control
      • Controls two Powder Feeders separately or simultaneously
      • Closed Loop RPM Control (when using 0-15 RPM AT-1200 Powder Feeders)
  • Process hour meter with settable maintenance alarm
  • 44kW Power Supply (1000 Amps at 44 Volts, 100% duty cycle)
  • 10 Ton Heat Exchanger with alarm feedback to console
  • Solid State High Frequency Arc Starter
  • Built-In Gun Voltage Sensing

Optional Features/Equipment:

  • 96kW Power Supply
  • Manipulation/Robot Interface
  • Wheeled Console Cart
AT-3000 system on cart

To learn more about the AT-3000 Plasma Control System please call (920) 779-4299, or contact us by email.

Download the AT-300 Plasma System sales brochure in .pdf format now.